FBX11 - Operations

This section will provide you with operation information for the FireBoard (FBX11). Make sure you’ve followed the steps to create your FireBoard account and activate your FireBoard.

You can access information about your device, such as WiFi connection and serial number, by pressing the Select button.

The FireBoard will require the FireBoard Drive Cable for fan use. Visit the Drive Operations section to learn more about using a fan with FireBoard.

FireBoard (FBX11) User Guide

Make sure you’ve Created a FireBoard Account, Installed the FireBoard App, and Activated your FireBoard.

Power on your unit by holding the Power button for three seconds.

The Select button allows you to cycle through device information.

To turn the unit off, hold the Power button for three seconds.

Reading Temperatures

Using your FireBoard is simple.

• Turn the unit on.
• Connect your temperature probes.

Once you’ve connected temperature probes, the FireBoard will automatically start logging temperatures and displaying them on the screen. After you’ve activated your FireBoard, you’re ready to start tracking your temperatures remotely, keep detailed notes on your sessions, get temperature alerts, and more.

Please note that the FireBoard will automatically reconnect to any wireless networks which have been previously configured and are still available. Temperatures are also always available over Bluetooth, provided it is in range (approx 100’). See the Bluetooth section for more information about Bluetooth connections.

A new session will automatically be started once temperature data is being pushed. You can easily modify the session name and add notes via the “Sessions” view of the app. For more information, visit the Sessions section.

Tracking Temperatures

Start logging temperature data by plugging a probe into one of the six available channels. Your FireBoard takes a temperature reading every five seconds for each probe connected.

View your temperature readings in the App on the Dashboard.